When a storefront window breaks, the glass usually cannot be replaced on the spot. Replacement glass has to be cut or ordered to size. Until it arrives, the opening needs to be closed so the business can lock up and stay protected from weather and break-ins.
This post walks through a recent board-up we did for a nail salon in Washington DC, using photos from the job. The short version is in our case study.

1. Make the opening safe
The salon’s arched front window had its lower pane smashed, with sharp pieces still hanging in the sash and more on the sill. Loose glass is the main injury risk on a job like this, for the technician, the owners and anyone walking past. We removed the loose pieces from the frame and the sill before doing anything else.
2. Measure the whole opening
A board that only covers the broken pane leaves gaps and is easy to pry off. We measured the full window opening, from the sill up to the underside of the arched trim and across the brick reveal, so the board would cover the entire window and sit inside the brickwork.
3. Fit the board inside the frame
The board was cut to those measurements and fixed across the window inside the brick frame. Setting it into the reveal, rather than on the face of the wall, makes it harder to get behind and keeps the decorative arched trim above the window clear.

4. Clean up before leaving
Broken glass travels. We swept the steps and sidewalk in front of the salon so customers and neighbors would not be walking through it the next morning.
What to do while you wait for new glass
- Take photos of the damage before and after the board-up. Your insurer will usually want both.
- Keep people away from any glass still inside the shop until it has been cleaned up.
- Note the size and type of the window, or ask us to, so the replacement can be ordered.
- Check the board from inside each day and call us if it has been tampered with.
For the first steps after a break, see our checklist on what to do when storefront glass breaks. When you are ready to replace the glass, our storefront glass repair page explains the options.
If a window at your business has been broken, call 571-621-0898 or send us the details and we will arrange a board-up.
